Small Log Processing

Plonarąsčių linija SLP1

(SLP - smart log processing)

Gauti komercinį pasiūlymą

Visos SLP linijos naudoja siaurus juostinius pjūklus, kurios užtikrina geresnę išeigą nei bet kuri kita medienos pjovimo technologija. SLP linija dažniausiai naudojama padėklų lentų gamyboje, nes tokiu būdu iš nebrangių iki 400 mm skersmens rąstų galima pagaminti komerciniu požiūriu vertingą produktą.

SLP linijos įrengimus galima išdėstyti įvairiais būdais, todėl liniją lengva pritaikyti skirtingiems gamybos poreikiams.

SLP linija sukurta remiantis moduliniu „Wood-Mizer“ principu, kur skirtingos staklės naudoja tuos pačius elektrinius komponentus (guolius, diržus ir pjūklus) taip mažinant atsarginių dalių sandėlyje išlaidas.

SLP linija:
• Kainuoja pigiau nei analogiškos
• Montavimui reikia mažiau išlaidų
• Gamina daugiau producijos ir mažiau atliekų iš žaliavos
• Sunaudoja mažiau energijos
• Nebrangi eksploatacija

SLP1 video

SLP1 Customer Videos


 TVS-SC2.4L 2 x 11 kW electric
 HR200 15 kW electric
 HR500 2 x 11 kW electric
 HR700 2 x 15 kW electric
 Power supply 400V / 50 Hz, 3Ph
Cutting Capacity
 Min. Log diameter 100 mm
 Max. Log diameter 400 mm
 Min. Log length 1.2 m
 Max. Log length 2.4-3.6 m
 Min. Cut width 70 mm
 Max. Cut width 250 mm
Sawmill Head Features & Options
 Standard equipment TVS - Twin Vertical Saw
SVS - Single Vertical Saw
HR500 or HR700 - MultiHead resaw
 Optional support equipment Loading: Log ramp,
               Log deck,
               Log incline deck
Conveyors: Transfer deck,
                   Roller tables
Blade ( length & width )
 TVS-SC2.4L 4.67 m x 32-38 mm
 HR200 4.01 m x 32-38 mm
 HR500 4.01 m x 32-38 mm
 HR700 4.67 m x 32-38 mm
Sawmill Dimensions & Requirements
 Length 28 m
 Width 8 m
 Height 2.15 m

SLP1 Layouts



The TVS (Twin Vertical Saw) uses thin-kerf blades to efficiently remove the two vertical sides of logs up to 400mm in diameter. The TVS is cost-effective, versatile, designed for high performance, and built strong for years of reliable service. The TVS works equally well as a stand-alone unit or integrated with an existing sawmill line.


The V feed system advances logs one at a time through the TVS. Spiked hold-downs guide the log. The lug spacing can be moved to suit the standard log lengths. This is a good option for straight logs with standard lengths.


The spiky chain feed system with heavy, spiked top-rollers adds greater stability to the log as it goes through the TVS. Logs can be loaded onto the feed chain with little or no gap between them. This option is ideal for increasing productivity with straight and curved logs.


For squaring up timber which already has two flat cut surfaces, a flat feed chain is available with heavy, spiked top-rollers. This is commonly used when two TVS units are used in line together. Another popular use for the TVS is for the slab recovery line. Large slabs can be put through the TVS and then fed down to a resaw or multi head resaw.


The SVS Single Vertical Saw simplifies the removal of the third side of a log during processing. Placed in the line behind the TVS, the SVS prepares the cant to move on to the resaw. The SVS has a maximum cut width of 300mm. The maximum material size is 400mm wide by 250mm high.


Ideal for companies that need an affordable multi-head resaw, the HR500 can grow with your business. From one to six heads, the HR500’s modular design allows you to add more saw heads later, and produce up to six boards and one slab in one pass. For short cants less than 1.2m long or material with internal tension, a steel double roller option is available.


The EG300 combines the functions of both an edger and a multirip into one machine. The EG300 maximises recovery from each board and increases overall productivity of your sawmill by 20-30%.


Material Handling Equipment

Designed to make loading the log deck with a forklift easier and more efficient. It also increases log capacity on the deck, thus minimising loading runs.

To keep your small log line supplied with timber, you need a strong and robust log infeed system. Our log decks have been designed to withstand the rigours of the forestry industry. Massively constructed, our log decks will give years of service in a very demanding environment.

  • • Powerful motor and gearbox ensure durability
  • • Heavy-duty link chain
  • • 200 x 100 main support tubes


The Log Incline Deck has been designed to bring the logs up to the operator station in a controlled manner, allowing the operator to concentrate on log alignment and continuous feeding into the TVS.

  • • Dogged link chain to help separate logs
  • • Trip switch ensures that the next log is always ready to load.
  • • Solidly constructed, with a large gearbox and motor to feed small and large logs every day.

Every sawmill is different. That is why we have made our transfer deck modular. Order a drive end module and an idle end module and then as many extension modules as you require for your layout. Increase or decrease the length of the conveyor, or the height/slope of the conveyor to suit your needs. As with our log decks, they are massively constructed to cope with the demands of the sawmilling environment. 

Incline decks – Remove side boards and more with the flexibility to select an incline angle that suits your needs. 

Flat transfer decks – Move timber in various directions with the flexibility to add as many extensions as required to meet your required length.

  • • High quality chain
  • • Trip switch to control material flow
  • • Rugged motor and gearbox
  • • Heavy duty construction

Simple roller table that can be used anywhere in the processing line. Efficient means to link machines together without employing more labour, by helping enable the smooth flow of timber through the sawmill.